Installation guide

Step 3 Use the device manager to perform basic blade switch configuration and monitoring. Refer to

the device manager online help for more information.

Using the Management Blade Web Interface

You can monitor and manage the blade switches through the BX600 system web interface. Follow

these steps:

1. Launch a web browser on your PC or workstation.

2. Enter the BX600 system IP address in the web browser, and press Enter. The web interface appears.

3. Click Switch Blade 1, Switch Blade 2, and so on to see the information for a specific blade switch.

You can do these tasks:

• In the Located LED field, choose on or off, and click Apply to locate the blade switch.

• Under Network Setting, click the URL Address field to open the blade switch web interface.

3040GSG.fm Page 21 Monday, September 18, 2006 9:45 AM