Installation guide

12
Connecting through the Blade Switch Console Port
Follow these steps to set up the blade switch by connecting it to a PC through its console port:
Step 1 Connect one end of the console cable to the blade switch console port. Connect the other end
of the cable to the serial port of a PC. (See Figure 6.)
Figure 6 Connecting through the Blade Switch Console Port
190185
11x
12x
13x
14x
15x
16x
Console
11x
12x
13x
14x
15x
16x
3040GSG.fm Page 12 Monday, September 18, 2006 9:45 AM