Specifications

2-39

Cisco Catalyst Blade Switch 3020 for HP Command Reference

OL-8916-01

Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands

clear mac address-table

Use the clear mac address-table privileged EXEC command to delete from the MAC address table a

specific dynamic address, all dynamic addresses on a particular interface, or all dynamic addresses on a

particular VLAN. This command also clears the MAC address notification global counters.

clear mac address-table {dynamic [address mac-addr | interface interface-id | vlan vlan-id] |

notification}

Syntax Description

Defaults No default is defined.

Command Modes Privileged EXEC

Command History

Examples This example shows how to remove a specific MAC address from the dynamic address table:

Switch# clear mac address-table dynamic address 0008.0070.0007

You can verify that the information was deleted by entering the show mac address-table privileged

EXEC command.

dynamic Delete all dynamic MAC addresses.

dynamic address

mac-addr

(Optional) Delete the specified dynamic MAC address.

dynamic interface

interface-id

(Optional) Delete all dynamic MAC addresses on the specified physical port

or port channel.

dynamic vlan vlan-id (Optional) Delete all dynamic MAC addresses for the specified VLAN. The

range is 1 to 4094.

notification Clear the notifications in the history table and reset the counters.

Release Modification

12.2(25)SEF This command was introduced.