Specifications

B-34
Cisco Catalyst Blade Switch 3020 for HP Command Reference
OL-8916-01
Appendix B Cisco Catalyst Blade Switch 3020 for HP Debug Commands
debug platform ip igmp snooping
Note Though visible in the command-line help strings, the rpc l3mm keyword is not supported.
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History
Usage Guidelines The undebug platform ip igmp snooping command is the same as the no debug platform ip igmp
snooping command.
Related Commands
Release Modification
12.2(25)SEF This command was introduced.
Command Description
debug ip igmp
snooping
Displays information about platform-independent IGMP snooping activity.
show debugging Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.