Specifications

2-273

Cisco Catalyst Blade Switch 3020 for HP Command Reference

OL-8916-01

Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands

show boot

Use the show boot privileged EXEC command to display the settings of the boot environment variables.

show boot [ | {begin | exclude | include} expression]

Syntax Description

Command Modes Privileged EXEC

Command History

Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output

are not displayed, but the lines that contain Output are displayed.

Examples This is an example of output from the show boot command. Table 2-15 describes each field in the

display.

Switch# show boot

BOOT path-list:

flash:cbs30x0-lanbase-mz-122.25.SEF/cbs30x0-lanbase-mz-122.25.SEF.binConfig file:

flash:/config.text

Private Config file: flash:/private-config

Enable Break: no

Manual Boot: yes

HELPER path-list:

NVRAM/Config file

buffer size: 32768

| begin (Optional) Display begins with the line that matches the expression.

| exclude (Optional) Display excludes lines that match the expression.

| include (Optional) Display includes lines that match the specified expression.

expression Expression in the output to use as a reference point.

Release Modification

12.2(25)SEF This command was introduced.