System information

Release Notes for Cisco VPN 3000 Series Concentrator, Release 3.6 Through 3.6.8.B

OL-5637-02

Caveats Resolved in Release 3.6.6

• CSCdy55655

When using Netscape 7.0 with the VPN 3000 Concentrator, after logging in and then trying to

configure something, you are returned to the login screen.

• CSCdy74252

For a VPN 3002 Hardware Client, v3.6 & v3.6.1, you can change PPPoE settings (for example,

password) from Quick Configuration, but the changed setting cannot be saved. When you make the

PPPoE change and return to the PPPoE setting screen, the Static IP Addressing is checked.

Changing PPPoE settings is not possible. However, if you change the PPPoE settings from

Configuration -> Interface, then you have no problem changing the PPPoE setting.

• CSCdy74667

The Linux Web browser Mozilla is not compatible with the VPN 3000 Concentrator or the VPN

3002 Hardware Client Web interface.

• CSCdz20934

If an EZVPN Client does not properly disconnect its tunnel to a VPN3000 Concentrator, its IKE SA

is not cleared from the Concentrator. The result is that each lingering IKE SA retains an address out

of the address pool.

This occurs only if the Client connects without xauth authentication.

• CSCdz22107

When using a Windows XP client connecting to a VPN 3000 Concentrator using split tunneling with

EAP, the networks specified in your network list are not passed down and installed into the client

computer.

• CSCdz25644

The XML import did not accept an OSPF router ID of 0.0.0.0, even though OSPF was not enabled.

This issue was found when downloading a full configuration to a device via an XML config file

import.

• CSCdz29498

The VPN3000 Concentrator might return fragments of Ethernet packet data within PPP reject

messages. This behavior occurs only when a decryption error occurs. The reject message might

contain data fragments from other Ethernet packets processed by the VPN 3000 Concentrator.

• CSCdz40860

The VPN 3000 Concentrator failed when exporting XML file under File Management with L2L with

Auto discovery configured.

• CSCdz48220

The VPN 3000 Concentrator continually requests the node secret from the RSA server. These

requests are considered as failed login attempts by the RSA server; therefore, the user's account is

disabled. This problem occurs under the following conditions:

–

The 3000 does not have the node secret stored locally.

–

The client provides an incorrect passcode.