Specifications

7-3
VPN 3000 Series Concentrator Reference Volume II: Administration and Monitoring
78-13274-01
Chapter 7 Access Rights
Administration | Access Rights | Administrators
Group Number
This is a reference number for the administrator. Cisco assigns these numbers so you can refer to
administrators by groups of properties. The numbers cannot be changed.
Username
The username, or login name, of the administrator. You can change this name on the Administration |
Access Rights | Administrators | Modify Properties screen.
Note The default passwords that Cisco supplies are the same as the usernames. We strongly recommend
that you change these passwords.
Properties / Modify
To modify the username, password, and access rights of the administrator, click Modify. See the
Administration | Access Rights | Administrators | Modify Properties screen.
Administrator
To assign “system administrator” privileges to one administrator, click the radio button. Only the
“system administrator” can access and configure properties in this section. You can select only one. By
default, admin is selected.
Enabled
Check the Enabled check box to enable, or clear the box to disable, an administrator. Only enabled
administrators can log in to, and use, the VPN Concentrator Manager. You must enable at least one
administrator, and you can enable all administrators. By default, only admin is enabled.
Apply / Cancel
To save the settings of this screen in nonvolatile memory, click Apply. The settings immediately affect
new sessions. The Manager returns to the Administration | Access Rights screen.
To discard your settings or changes, click Cancel. The Manager returns to the Administration | Access
Rights screen.