Specifications

A-3
VPN 3000 Series Concentrator Reference Volume II: Administration and Monitoring
78-13274-01
Appendix A Using the Command-Line Interface
Accessing the CLI
SSH Access
To access the CLI via an SSH client:
Step 1 Enable the SSH server on the VPN Concentrator. (It is enabled by default.) See the Configuration |
System | Management Protocols | SSH screen on the VPN Concentrator Manager.
Step 2 Start the SSH client, and connect to the remote system using these parameters:
• Host Name or Session Name = The IP address on the VPN Concentrator Ethernet 1 (Private)
interface; e.g., 10.10.147.2
• Port = SSH (The default SSH port is 22.)
• Terminal Type = VT100 or ANSI
• User name = admin
Step 3 A security warning might appear stating: “There is no entry for this server in your list of know hosts.”
If this warning appears, continue.
Step 4 Enter your administrative password, and connect to the VPN Concentrator. When your connection is
established, you are already logged in.