Specifications

15-60
VPN 3000 Series Concentrator Reference Volume II: Administration and Monitoring
78-13274-01
Chapter 15 Statistics
Monitoring | Statistics | MIB-II | OSPF
Refresh
To update the screen and its data, click Refresh. The date and time indicate when the screen was last
updated.
Router ID
The VPN Concentrator OSPF router ID. This ID uniquely identifies the VPN Concentrator to other
OSPF routers in its domain. While the format is that of an IP address, it functions only as an identifier
and not an address. By convention, however, this identifier is the same as the IP address of the interface
that is connected to the OSPF router network. 0.0.0.0 means no router is configured.
Version
The current version number of the OSPF protocol running on the VPN Concentrator.
External LSA Count
The number of external Link-State Advertisements (LSAs) in the link-state database. LSAs from
neighboring OSPF Autonomous Systems (AS) describe the state of the AS routers interfaces and
routing paths.
External LSA Checksum
The sum of the checksums of the external Link-State Advertisements in the link-state database. You can
use this sum to determine if there has been a change in the OSPF router link-state database of the system,
and to compare its database with other routers.
LSAs Originated
The number of new Link-State Advertisements that the system has originated. This number is
incremented each time the OSPF router originates a new LSA.
New LSAs Received
The number of Link-State Advertisements received that are completely new LSAs. This number does
not include newer instances of self-originated LSAs.
LSA Database Limit
The maximum number of external LSAs that can be stored in the link-state database. A value of -1 means
there is no limit.