Specifications

13-17
VPN 3000 Series Concentrator Reference Volume II: Administration and Monitoring
78-13274-01
Chapter 13 System Status
Monitoring | System Status | SEP
SEP
The chassis slot number where this SEP is inserted, and the type of hardware in this SEP:
• CryptSet = first-release hardware using a set of integrated circuits.
• CryptIC = second-release hardware using a single integrated circuit.
• Unknown = hardware could not be determined. This is an error condition; please contact Cisco
Customer Support.
Status
The functional state of this SEP module:
• Operational = module is operating correctly.
• Not Operational = module has failed during operation. This is an error condition; please contact
Cisco Customer Support.
• Found = module is installed but is not yet operational. If this condition persists after the VPN
Concentrator finishes initializing, it is an error. Please contact Cisco Customer Support.
• Not Found = module could not be found. This is an error condition; please contact Cisco Customer
Support.
• Loading = the system is loading microcode into the SEP module.
• Initializing = the system is initializing the SEP module.
• Diagnostic Failure = module failed during diagnostic testing. This is an error condition; please
contact Cisco Customer Support.
DSP Code Version
The version of DSP (Digital Signal Processing) microcode running on this SEP module. This
information might be useful during troubleshooting.
Inbound Hash: Octets
The number of inbound octets (bytes) to which this SEP applied a hashing algorithm for authentication.
Inbound Hash: Packets
The number of inbound authentication-only hashed packets processed by this SEP. Only hashing
algorithms are applied to authentication-only traffic; there is no encryption or decryption.