Specifications

11-2
VPN 3000 Series Concentrator Reference Volume II: Administration and Monitoring
78-13274-01
Chapter 11 Routing Table
Monitoring | Routing Table
Refresh
To update the screen and its data, click Refresh. The date and time indicate when the screen was last
updated.
Clear Routes
Click the Clear Routes button to clear the dynamic routing entries, such as RIP and OSPF, from the
display. Clicking this button does not affect the display of static routing entries.
Valid Routes
The total number of current valid routes that the VPN Concentrator knows about. This number includes
all valid routes, and it may be greater than the number of rows in the routing table, which shows only
the best routes with duplicates removed.
Address
The packet destination IP address to which this route applies. This address is combined with the subnet
mask to determine the destination route. 0.0.0.0 indicates the default gateway.
Mask
The subnet mask for the destination IP address in the Address field. 0.0.0.0 indicates the default gateway.
Next Hop
For remote routes, the IP address of the next system in the path to the destination. 0.0.0.0 indicates a
local route. There is no next hop.
Interface
The VPN Concentrator network interface through which traffic moves on this route:
• 1 = Ethernet 1 (Private) interface.
• 2 = Ethernet 2 (Public) interface.
• 3 = Ethernet 3 (External) interface.
• 8 or greater = WAN interface.