System information

VPN Client Installation Steps 187

VPN 3000 Concentrator Browser-Based Manager Quick

Conﬁguration Steps

The steps to the VPN 3000 Concentrator browser-based Manager Quick Conﬁguration are as

follows:

Step 1 Ping the VPN concentrator from the administrator PC to verify connectivity.

Step 2 Start the web browser.

Step 3 Enter the address of the VPN concentrator (be sure to use https:// if you need

to enable the VPN concentrator’s SSL Certiﬁcate on your browser).

Step 4 Log in as admin/admin.

Step 5 Select Click here to start Quick Conﬁguration.

Step 6 Select hotlink to Ethernet 2 (Public) interface.

Step 7 Enter the IP address, subnet mask, speed, and duplex mode.

Step 8 Verify the system name, date, time, time zone, and DST support.

Step 9 Enter the DNS server address.

Step 10 Enter the domain name.

Step 11 Enter the default gateway address.

Step 12 Select the tunneling protocols to use—IPSec.

Step 13 Select the methods of assigning IP address for the IPSec tunnel endpoints.

Step 14 Choose the method for user authentication (Internal Server).

Step 15 Add usernames and passwords.

Step 16 Supply the IPSec group name and password.

Step 17 Change the admin password.

Step 18 Click the Save Needed icon to save the conﬁguration changes.

VPN Client Installation Steps

The steps for installing the VPN Client are as follows:

Step 1 Insert the Cisco VPN Client CD into your CD-ROM drive.

Step 2 View the CD’s menu after Autorun starts the CD.

Step 3 Select Install Cisco VPN Client.

chpt_04.fm Page 187 Friday, April 4, 2003 9:19 AM