System information

Installing and Configuring the VPN Client 183
VPN 3000 Concentrator Series Manager” section of this chapter. Enter either the IP address of
the device or the fully qualified domain name (FQDN), if you know it. The public IP address
of the VPN concentrator is required, so enter 172.16.1.3 to reach the concentrator you
configured earlier. Click Next after you have identified the host server.
Figure 4-39 New Connection Address
Because you have not yet installed any digital certificates onto your PC, the next screen presents
only one option to use for authenticating the IPSec connection. In Figure 4-40 you can see that
the Certificate option is grayed out. To configure the client to use a preshared key for the IPSec
connection, simply enter the IPSec group name and password in the appropriate fields of the
Group Access Information section.
Figure 4-40 Entering the Preshared Key
chpt_04.fm Page 183 Friday, April 4, 2003 9:19 AM