System information

VPN Concentrator Configuration 159
Figure 4-22 Configuration | User Management | Groups | Modify > IPSec
Modify Groups—Client Config Tab
The Client Config tab screen is shown in Figure 4-23. Configuration of the attributes on this
screen is only necessary if you selected Mode Configuration from the IPSec tab screen. The
attributes on this page have the following meanings:
• Banner—You can enter up to a 510-character greeting banner that is displayed to IPSec
software clients each time they log in to the system.
• Allow Password Storage on Client—This option allows the client PC to store the user’s
password. For security reasons, this is not a good policy. The default is to have this
capability disabled.
• IPSec over UDP—This option permits clients to connect to the VPN concentrator via
UDP through a firewall or router using NAT.
• IPSec over UDP Port—This attribute lets you set the port to use through the firewall. The
default is 10,000.
chpt_04.fm Page 159 Friday, April 4, 2003 9:19 AM