System information

150 Chapter 4: Configuring Cisco VPN 3000 for Remote Access Using Preshared Keys
Figure 4-14 Configuration | Quick | IPSec Group
Configuring the Admin Password
The final setting that you should configure during the Quick Configuration is the password for
the admin user. Figure 4-15 shows the Quick Configuration screen for completing this task and
displays the message that strongly recommends changing the admin password. For maximum
password security, select a password containing at least eight characters that are a mixture of
uppercase and lowercase letters, numbers, and special characters.
Figure 4-15 Configuration | Quick | Admin Password
Saving Configuration Settings
When you click the Continue button after changing the admin password, the VPN Manager
presents you with the Quick Configuration Done screen, as shown in Figure 4-16. At this point,
you have configured the system information, LAN and WAN interfaces, users, and IPSec group,
completing the basic configuration of the VPN concentrator.
chpt_04.fm Page 150 Friday, April 4, 2003 9:19 AM