System information

VPN Concentrator Configuration 149
Figure 4-13 Configuration | Quick | User Database
There is a maximum combined number of groups and users that you can configure on a VPN
3000 Concentrator. The number varies by concentrator model, as shown in Table 4-2.
Configuring the IPSec Tunnel Group
When you select IPSec as the tunneling protocol from the screen shown in Figure 4-10, the
concentrator prompts you to define a group during the Quick Configuration phase. This group
is used by every user unless you change the association later from the standard configuration
section of the VPN Manager. Figure 4-14 shows the configuration information for the IPSec
group. The password for this group becomes the preshared key for remote access users.
Table 4-2 Maximum Number of Combined Groups and Users per VPN Model
Model Maximum Combined Number of Groups and Users
3005 100
3015 100
3030 500
3060 1000
3080 1000
chpt_04.fm Page 149 Friday, April 4, 2003 9:19 AM