System information

148 Chapter 4: Configuring Cisco VPN 3000 for Remote Access Using Preshared Keys
Figure 4-11 Configuration | Quick | Address Assignment
Configuring User Authentication Method
Next, you determine how users connecting over the VPN tunnel are to be authenticated.
Figure 4-12 shows the selection screen. Users can be authenticated from RADIUS servers,
NT Domain controllers, external SDI servers, and the concentrator’s internal server. The option
you select brings up the appropriate next screen so that you can continue configuring user
authentication.
Figure 4-12 Configuration | Quick | Authentication
Configuring Users for Internal Authentication
The example shown in Figure 4-12 has selected the Internal Server option and brings up the
User Database screen, shown in Figure 4-13, so that you can enter the usernames and pass-
words. This screen also requests an IP address and subnet mask because, in this case, the
concentrator’s administrator selected Per User address assignment on the screen displayed in
Figure 4-11.
chpt_04.fm Page 148 Friday, April 4, 2003 9:19 AM