System information

VPN Concentrator Configuration 147
Figure 4-9 Configuration | Quick | System Info
Configuring the Tunneling Protocol
Clicking the Continue button takes you to the Protocols screen, as shown in Figure 4-10. You
can select all protocols, if you like. The configuration described in this chapter works with
IPSec only, so that is the only protocol selected on this screen.
Figure 4-10 Configuration | Quick | Protocols
Configuring Address Assignment Method
After you have selected the protocol to use, you must select the method the VPN concentrator
is to use to assign an address to clients as they establish tunnels with the concentrator. The
method of address assignment selected in Figure 4-11 is to use a DHCP server. You could select
multiple methods; the concentrator tries each method in order until it is successful in assigning
an address to the client.
chpt_04.fm Page 147 Friday, April 4, 2003 9:19 AM