System information

146 Chapter 4: Configuring Cisco VPN 3000 for Remote Access Using Preshared Keys
Figure 4-8 Configuration | Quick | IP Interfaces | Ethernet 1
NOTE If you disable the Private interface, you lose your browser connection to the concentrator.
The Speed and Duplex settings were configured from the CLI in this example. The default
settings for these two fields are 10/100 Auto and Auto, respectively, allowing the systems to
negotiate speed and duplex mode.
When you have completed entering the configuration settings for an interface, click the Apply
button to save the settings and return to the IP Interfaces screen. Once you have configured all
the interfaces, click the Continue button to proceed to the next Quick Configuration screen.
Configuring System Information
The System Info screen is the next screen displayed. Figure 4-9 shows this screen. The date and
time settings were entered during the CLI configuration steps. You can enter a system name here
along with DNS server, domain name, and default gateway information.
chpt_04.fm Page 146 Friday, April 4, 2003 9:19 AM