System information

138 Chapter 4: Configuring Cisco VPN 3000 for Remote Access Using Preshared Keys

Once you have entered the correct login name and password, the concentrator displays a

welcome screen, as shown in Example 4-1.

Setting the System Time, Date, and Time Zone

At this point, the concentrator is waiting for you to verify the current time by pressing Enter

or to type in a new time, as shown in Example 4-2. Notice that the system prompt changes to

Quick -> to indicate that the system is waiting for you to conﬁrm or enter data. The following

example also shows the entries that are required (in boldface type) to complete the conﬁguration

of the date, time zone, and daylight-savings time support information.

Example 4-1 Quick Conﬁguration Welcome Screen

Welcome to

Cisco Systems

VPN 3000 Concentrator Series

Command Line Interface

-- : Set the time on your device. The correct time is very important,

-- : so that logging and accounting entries are accurate.

-- : Enter the system time in the following format:

-- : HH:MM:SS. Example 21:30:00 for 9:30 PM

> Time

Quick -> [ 08:57:13 ]

Example 4-2 Setting the System Time and Date

Quick -> [ 08:57:13 ] 08:15:22

-- : Enter the date in the following format.

-- : MM/DD/YYYY Example 06/12/1999 for June 12th 1999.

> Date

Quick -> [ 03/29/2002 ] 09/01/2002

-- : Set the time zone on your device. The correct time zone is very

-- : important so that logging and accounting entries are accurate.

-- : Enter the time zone using the hour offset from GMT:

-- : -12 : Kwajalein -11 : Samoa -10 : Hawaii -9 : Alaska

-- : -8 : PST -7 : MST -6 : CST -5 : EST

-- : -4 : Atlantic -3 : Brasilia -2 : Mid-Atlantic -1 : Azores

chpt_04.fm Page 138 Friday, April 4, 2003 9:19 AM