Specifications

4-18

VPN 3000 Series Concentrator Getting Started

78-15733-03

Chapter 4 Using the Command-Line Interface for Quick Configuration

Saving the Active Configuration

The system displays the final quick configuration menu.

1) Goto Main Configuration Menu

2) Save changes to Config file

3) Exit

Quick -> 2

At the cursor, enter 2 to save the active configuration in the system config file.

Exiting the CLI

You are now ready to exit the CLI.

Step 1 The system redisplays the final quick configuration menu.

1) Goto Main Configuration Menu

2) Save changes to Config file

3) Exit

Quick -> 3

At the cursor, enter 3 to exit the CLI.

Step 2 The system displays:

Done

If you wish to use the CLI for other functions, enter 1 at the cursor in Step 1 above. For information on

using the CLI, see the VPN 3000 Series Concentrator Reference Volume I: Configuration.

What Next?

Now that the VPN Concentrator is operational, you can do the following:

• Test its operation by following the procedures in Chapter 5, “Testing the VPN Concentrator.”

• Explore the command-line interface. The menus follow the same order, and let you perform the same

functions, as the VPN Concentrator Manager. See Appendix A, “Using the Command Line

Interface,” in the VPN 3000 Series Concentrator Reference Volume II: Administration and

Monitoring for explanations of parameters and entries.

• Explore the VPN Concentrator Manager window and other VPN Concentrator functions. See

Chapter 1, “Using the VPN 3000 Concentrator Series Manager,” in the VPN 3000 Series

Concentrator Reference Volume I: Configuration.

• Proceed to a more detailed and complete system configuration. See the VPN 3000 Series

Concentrator Reference Volume I: Configuration.