Specifications

4-16

VPN 3000 Series Concentrator Getting Started

78-15733-03

Chapter 4 Using the Command-Line Interface for Quick Configuration

Setting Up the WebVPN Home Page

The following prompts appear only if you enabled WebVPN. (See “Configuring Tunneling Protocols and

Options.”)

This section describes how to customize the home page that WebVPN users will see when they log in.

You can change the title, add a banner, and configure up to four URLs.

Step 1 Enter the title to appear on each WebVPN page, for example: My Company Remote Access.

> Set WebVPN Home Page Title

Quick -> [ VPN 3000 Concentrator ]

Step 2 Enter a banner to appear on the WebVPN home page for the base group, for example: Welcome to My

Company Remote Access

. To keep the current value, enter a period (.) on a separate line, as shown below.

> Set Base Group Banner

Use '.' by itself on line to finish. Enter just a '.' to keep existing value.

-> .

Step 3 To have a link to a specific website appear on the WebVPN home page, enter the website’s name. You

can enter any name that users will easily recognize.

> Enter a descriptive name of the first HTTP/HTTPS URL

Quick ->

Step 4 Enter the website’s URL. You can enter up to four websites/URLs.

Step 5 The system prompts you to enable users to enter their own URLs to access websites other than the ones

listed on the home page. Enabling this field causes an address entry field to display on the WebVPN

home page.

1) Enable User to Enter URLs

2) Disable User to Enter URLs

Quick -> [ 1 ]

At the cursor, enter 2 to disable users to enter URLS, or press Enter to accept the default (1), which

enables it.