Specifications

4-15
VPN 3000 Series Concentrator Getting Started
78-15733-03
Chapter 4 Using the Command-Line Interface for Quick Configuration
Configuring WebVPN Remote Access
Step 2 The system prompts you to enable or disable POP3S.
1) Enable POP3S
2) Disable POP3S
Quick -> [ 2 ]
At the cursor, enter 1 to enable POP3S, or press Enter to accept the default (2), which disables POP3S.
If you enter
1, the system displays the following menu:
> Set POP3S Default Server
Quick ->_
Enter the IP address of the mail server.
Step 3 The system prompts you to enable or disable SMTPS:
1) Enable SMTPS
2) Disable SMTPS
Quick -> [ 2 ]
At the cursor, enter 1 to enable SMTPS, or press Enter to accept the default (2), which disables SMTPS
If you enter
1, the system displays the following menu:
> Set SMTPS Default Server
Quick ->_
Enter the IP address of the mail server.
Step 4 The system prompts you to enable or disable IMAP4S:
1) Enable IMAP4S
2) Disable IMAP4S
Quick -> [ 2 ]
At the cursor, enter 1 to enable IMAP4S, or press Enter to accept the default (2), which disables
IMAP4S.
If you enter
1, the system displays the following menu:
> Set IMAP4S Default Server
Quick ->_
Enter the IP address of the mail server.