Specifications

2-14
VPN 3000 Series Concentrator Getting Started
78-15733-03
Chapter 2 Installing and Powering Up the VPN Concentrator
Beginning Quick Configuration
Authentication Your choice here determines the parameters you see in the
following screen. Possible values are:
• Internal Server
– Choosing Internal Server, means using the internal
VPN Concentrator user authentication server. On
the User Database screen, specify the username and
password for each user.
– Additionally, if you specify per-user address
assignment, specify the IP address and subnet mask
for each user.
• RADIUS
If you use an external RADIUS user authentication
server, specify its IP address or hostname, port number,
and server secret or password.
• NT Domain
If you use an external Windows NT Domain user
authentication server, specify its IP address, port
number, and Primary Domain Controller hostname.
• SDI
If you use an external SDI user authentication server,
specify its IP address and port number.
• Kerberos/Active Directory
If you use an external Kerberos/Active Directory
authentication server, specify its IP address, port
number, and realm.
User Database | Group Name,
Password, Verify
If you enable the IPSec tunneling protocol, specify a name
and password for the IPSec tunnel group.
Note For security
reasons, do not
write your
password here.
IPSec Group Decide on a group name and password for the remote-access
IPSec client.
WebVPN If you enable WebVPN, specify the default HTTPS, POP3S,
SMTPS, or IMAP4S servers.
WebVPN Home Page If you enable WebVPN using HTTPS, configure the text and
URLs that you want to appear on the WebVPN Home page.
Table 2-2 Quick Configuration Parameters (continued)
Screen | Parameter Name Parameter Description and Use Your Entry