Specifications

22-23
Catalyst 2970 Switch Software Configuration Guide
78-15462-03
Chapter 22 Configuring SPAN and RSPAN
Displaying SPAN and RSPAN Status
Displaying SPAN and RSPAN Status
To display the current SPAN or RSPAN configuration, use the show monitor user EXEC command. You
can also use the show running-config privileged EXEC command to display configured SPAN or
RSPAN sessions.
This is an example of output for a switch with two source sessions configured:
Switch# show monitor
Session 1
---------
Type :Local Session
Source Ports:
RX Only: Gi0/24
TX Only: None
Both: Gi0/1-2,Gi0/5-6
Source VLANs:
RX Only: None
TX Only: None
Both: None
Source RSPAN VLAN:None
Destination Ports:Gi0/18
Encapsulation:Replicate
Filter VLANs: None
Dest RSPAN VLAN: None
Session 2
---------
Type :Remote Source Session
Source Ports:
RX Only: None
TX Only: None
Both: None
Source VLANs:
RX Only: None
TX Only: 10
Both: 1-9
Source RSPAN VLAN:None
Destination Ports:None
Filter VLANs: None
Dest RSPAN VLAN: 105