Specifications

1-9
Catalyst 2970 Switch Software Configuration Guide
78-15462-03
Chapter 1 Overview
Default Settings After Initial Switch Configuration
MSTP Disabled Chapter 15, “Configuring MSTP”
Optional spanning-tree features Disabled Chapter 16, “Configuring Optional
Spanning-Tree Features”
DHCP snooping
DHCP snooping Disabled Chapter 17, “Configuring DHCP
Features”
DHCP snooping information option Enabled
IGMP snooping
IGMP snooping Enabled Chapter 18, “Configuring IGMP Snooping
and MVR”
IGMP filters None applied
IGMP throttling Deny
MVR Disabled
Port-based Traffic
Broadcast, multicast, and unicast storm
control
Disabled Chapter 19, “Configuring Port-Based
Traffic Control”
Protected ports None defined
Unicast and multicast traffic flooding Not blocked
Secure ports None configured
CDP Enabled Chapter 20, “Configuring CDP”
UDLD Disabled Chapter 21, “Configuring UDLD”
SPAN and RSPAN Disabled Chapter 22, “Configuring SPAN and
RSPAN”
RMON Disabled Chapter 23, “Configuring RMON”
Syslog messages Enabled; displayed on the console Chapter 24, “Configuring System Message
Logging”
SNMP Enabled; version 1 Chapter 25, “Configuring SNMP”
ACLs None configured Chapter 26, “Configuring Network
Security with ACLs”
QoS Disabled Chapter 27, “Configuring QoS”
EtherChannels None configured Chapter 28, “Configuring EtherChannels”
Table 1-1 Default Settings After Initial Switch Configuration (continued)
Feature Default Setting More information in...