Specifications

Contents
x
Catalyst 2970 Switch Software Configuration Guide
78-15462-03
EtherChannel Port Groups 9-4
Connecting Interfaces 9-4
Using Interface Configuration Mode 9-5
Procedures for Configuring Interfaces 9-5
Configuring a Range of Interfaces 9-6
Configuring and Using Interface Range Macros 9-7
Configuring Ethernet Interfaces 9-9
Default Ethernet Interface Configuration 9-9
Configuring Interface Speed and Duplex Mode 9-10
Configuration Guidelines 9-10
Setting the Interface Speed and Duplex Parameters 9-11
Configuring IEEE 802.3X Flow Control 9-12
Configuring Auto-MDIX on an Interface 9-13
Adding a Description for an Interface 9-14
Configuring the System MTU 9-14
Monitoring and Maintaining the Interfaces 9-16
Monitoring Interface Status 9-16
Clearing and Resetting Interfaces and Counters 9-17
Shutting Down and Restarting the Interface 9-17
CHAPTER 10 Configuring SmartPort Macros 10-1
Understanding SmartPort Macros 10-1
Configuring Smart-Port Macros 10-2
Default SmartPort Macro Configuration 10-2
SmartPort Macro Configuration Guidelines 10-2
Creating and Applying SmartPort Macros 10-3
Displaying SmartPort Macros 10-4
CHAPTER 11 Configuring VLANs 11-1
Understanding VLANs 11-1
Supported VLANs 11-3
VLAN Port Membership Modes 11-3
Configuring Normal-Range VLANs 11-4
Token Ring VLANs 11-5
Normal-Range VLAN Configuration Guidelines 11-6
VLAN Configuration Mode Options 11-6
VLAN Configuration in config-vlan Mode 11-6
VLAN Configuration in VLAN Database Configuration Mode 11-7