Specifications

4-23
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
78-11380-07
Chapter 4 Getting Started with CMS
Menus and Toolbar
• Candidate switch without an IP address (Table 4-20)
• Neighboring devices (Table 4-21)
Note The Device Manager option in these popup menus is available in read-only mode on Catalyst 2900 XL
and Catalyst 3500 XL switches running Release 12.0(5)WC2 and later. It is also available on
Catalyst 2950 switches running Release 12.1(6)EA2 or later, Catalyst 2955 switches running
Release 12.1(12c)EA1 or later, and on Catalyst 3550 switch running Release 12.1(8)EA1 or later. It is
not available on the Catalyst 1900 and Catalyst 2820 switches.
To display a device popup menu, click an icon, and right-click.
Table 4-16 Cluster Icon Popup Menu
Popup Menu Option Task
Expand cluster View a cluster-specific topology view.
Properties Display information about the device.
Table 4-17 Command-Switch Icon Popup Menu
Popup Menu Option Task
Collapse cluster View the neighborhood outside a specific cluster.
Host Name Change the host name of a switch.
Bandwidth Graphs Display graphs that plot the total bandwidth in use by the switch.
Properties Display information about the device.
Table 4-18 Member or Standby Command-Switch Icon Popup Menu
Popup Menu Option Task
Remove from Cluster Remove a member from the cluster.
Host Name1 Change the host name of a switch.
Device Manager Launch Device Manager for a switch.
Bandwidth Graphs Display graphs that plot the total bandwidth in use by the switch.
Properties Display information about the device.
Table 4-19 Candidate-Switch Icon Popup Menu (When the Candidate Switch Has an IP Address)
Popup Menu Option Task
Add to Cluster Add a candidate to a cluster.
Device Manager Launch Device Manager for a switch.
Properties Display information about the device.