Specifications

4-20
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
78-11380-07
Chapter 4 Getting Started with CMS
Menus and Toolbar
Front Panel View Popup Menus
These popup menus are available in the Front Panel view:
Device Popup Menu
You can display all switch and cluster configuration windows from the menu bar, or you can display
commonly-used configuration windows from the device popup menu, as listed in Table 4-13. To display
the device popup menu, click the switch icon from the cluster tree or the front-panel image itself, and
right-click.
Save
Configuration
2
Ctrl-S Save the configuration of the cluster of a switch to Flash memory.
Software
Upgrade
2
Ctrl-U Upgrade the software for the cluster or a switch.
Port Settings
1
— Display and configure port parameters on a switch.
VLAN
1
Ctrl-V Display VLAN membership, assign ports to VLANs, and change the administration
mode.
Inventory Ctrl-T Display the device type, the software version, the IP address, and other information
about a switch.
Refresh — Update the views with the latest status.
Front Panel — Display the Front Panel view.
Topology
3
— Display the Topology view.
Topology
Options
3
— Select the information to be displayed in the Topology view.
Save Topology
2
3
Layout
— Save the presentation of the cluster icons that you arranged in the Topology view to
Flash memory.
Legend — Display the legend that describes the icons, labels, and links.
Help for Active
Window
F1 key Display the help for the active open window. You can also click Help from the active
window.
1. Not available in read-only mode. For more information about the read-only and read-write access modes, see the “Access Modes in CMS” section on
page 4-30.
2. Some options from this menu option are not available in read-only mode.
3. Available only from a cluster-management session.
Table 4-12 Toolbar Buttons (continued)
Toolbar Option Icon
Keyboard
Shortcut Task