Specifications

4-17
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
78-11380-07
Chapter 4 Getting Started with CMS
Menus and Toolbar
– Delete Cluster—Delete a cluster (not available in read-only mode). This option is available
only from a cluster management session.
– Add to Cluster—Add a candidate to a cluster (not available in read-only mode). This option is
available only from a cluster management session.
– Remove from Cluster—Remove a member from the cluster (not available in read-only mode)
This option is available only from a cluster management session.
– Standby Command Switches—Create a Hot Standby Router Protocol (HSRP) standby group
to provide command-switch redundancy. Some options from this menu are not available in
read-only mode. This option is available only from a cluster management session.
– Hop Count—Enter the number of hops away that a command switch looks for members and for
candidate switches. Some options from this menu are not available in read-only mode. This
option is available only from a cluster management session.
• Device
– Device Manager—Launch Device Manager for a specific switch. This option is available only
from a cluster management session (Catalyst 1900 and Catalyst 2820 member switches only).
– Host Name—Change the host name of a switch (not available in read-only mode).
– Alarms (Catalyst 2955 only)—Configure alarm settings for an interface or for the entire device,
and view the status of any unresolved alarms.
– STP—Display and configure STP parameters for a switch. Some options from this menu are not
available in read-only mode.
– IGMP Snooping—Enable and disable Internet Group Management Protocol (IGMP) snooping
and IGMP Immediate-Leave processing on the switch. Join or leave multicast groups, and
configure multicast routers. Some options from this menu are not available in read-only mode.
– 802.1X—Configure 802.1X authentication of devices as they are attached to LAN ports in a
point-to-point infrastructure (not available in read-only mode).
– ACL (guide mode available in read-write mode)—Create and maintain access control lists
(ACLs), and attach ACLs to specific ports. Some options from this menu are not available in
read-only mode.
– This option is available only from a switch running the EI.
– Security Wizard—Filter certain traffic, such as HTTP traffic, to certain networks or devices.
Restrict access to servers, networks, or application data from certain networks or devices (not
available in read-only mode).
– This option is available only from a switch running the EI.
– QoS—Display submenu options to configure, enable, and disable quality of service (QoS)
parameters for Trust settings, Queues, Maps, Classes (guide mode available), and Policies (guide
mode availab
le. Some options from this menu are not available in read-only mode.
– AVVID Wizards—Configure a port to send or receive voice traffic by using the Voice Wizard.
Optimize multiple video servers for sending video traffic by using the Video Wizard. Provide a
higher priority to specific applications by using the Data Wizard.
Note AVVID Wizards are not available in read-only mode.