Specifications

28-14
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
78-11380-07
Chapter 28 Configuring EtherChannels
Configuring EtherChannels
Beginning in privileged EXEC mode, follow these steps to configure the LACP system priority:
Command Purpose
Step 1
configure terminal Enter global configuration mode.
Step 2
lacp system-priority priority-value Select the LACP system priority value.
For priority-value, the range is 1 to 65535. By
default, the priority value is 32768. The lower the
range, the higher the system priority. The switch
with the lower system priority value determines
which links between LACP partner switches are
active and which are in standby for each LACP
EtherChannel.
Step 3
end Return to privileged EXEC mode.
Step 4
show running-config
or
show lacp channel-group-number internal
Verify your entries.
Step 5
copy running-config startup-config (Optional) Save your entries in the configuration
file.