Specifications

2-42
Catalyst 2950 and Catalyst 2955 Switch Command Reference
78-15304-01
Chapter 2 Cisco IOS Commands
cluster standby-group
This example shows the error message when this command is entered on a member switch:
Switch(config)# cluster standby-group my_hsrp
%ERROR:This command runs on a cluster command switch
You can verify your settings by entering the show cluster privileged EXEC command.
Related Commands Command Description
show cluster Displays the cluster status and a summary of the cluster to which the switch
belongs.
show standby Displays standby group information.
standby ip Enables HSRP on the interface.