Specifications

B-6
Catalyst 2950 and Catalyst 2955 Switch Command Reference
78-15304-01
Chapter B Debug Commands
debug pagp
debug pagp
Use the debug pagp privileged EXEC command to debug Port Aggregation Protocol (PAgP) activity.
Use the no form of this command to disable debugging output.
debug pagp [all | event | fsm | misc | packet]
no debug pagp [all | event | fsm | misc | packet]
Syntax Description
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History
Usage Guidelines This command can be entered only from the switch console.
The undebug pagp command is the same as no debug pagp command.
Related Commands
all (Optional) Enable all PAgP debugging.
event (Optional) Enable debugging of PAgP events.
fsm (Optional) Enable debugging of the PAgP finite state machine.
misc (Optional) Enable miscellaneous PAgP debugging.
packet (Optional) Enable PAgP packet debugging.
Release Modification
12.1(6)EA2 This command was first introduced.
Command Description
show debugging Displays information about the types of debugging that are enabled. For
syntax information, refer to Cisco IOS Configuration Fundamentals
Command Reference For IOS Release 12.1 > Cisco IOS System
Management Commands > Troubleshooting Commands.
show pagp Displays PAgP channel-group information.