Specifications

B-3
Catalyst 2950 and Catalyst 2955 Switch Command Reference
78-15304-01
Chapter B Debug Commands
debug autoqos
Related Commands Command Description
auto qos voip Configure auto-QoS for voice over IP (VoIP) within a QoS domain.
show auto qos Displays the configuration applied and the new defaults in effect when
auto-QoS is enabled.
show debugging Displays information about the types of debugging that are enabled. For syntax
information, select Cisco IOS Configuration Fundamentals Command
Reference For IOS Release 12.1 > Cisco IOS System Management
Commands > Troubleshooting Commands.