Specifications

A-6

Catalyst 2950 and Catalyst 2955 Switch Command Reference

78-15304-01

Appendix A Catalyst 2955-Specific Alarm Commands

alarm profile (global configuration)

Use the alarm profile global configuration command to create an alarm profile and to enter alarm profile

configuration mode. Use the no form of this command to delete an alarm profile.

alarm profile name

no alarm profile name

Syntax Description

Defaults No alarm profiles are created.

When a profile is created, none of the alarms are enabled.

Command Modes Global configuration

Command History

Usage Guidelines In alarm-profile configuration mode, these commands are available:

• alarm alarm-id: enables the specified alarm.

• exit: exits from alarm-profile configuration mode.

• help: displays a description of the interactive help system.

• no: negates or sets the default values of a command.

• notifies alarm-id: enables notification for the alarm, which means sending an SNMP trap to an

SNMP server.

• relay-major alarm-id: enables sending the alarm to the major relay circuitry.

• relay-minor alarm-id: enables sending the alarm to the minor relay circuitry.

• syslog alarm-id: enables sending the alarm to a syslog file.

For alarm-id, you can enter one or more alarm IDS separated by a space.

Before you use the notifies command to send alarm traps to a Simple Network Management Protocol

(SNMP) host, you need to set up an SNMP server by using the snmp-server enable traps global

configuration command.

name Alarm profile name

Release Modification

12.1(12c)EA1 This command was first introduced.