Specifications

2-205
Catalyst 2950 and Catalyst 2955 Switch Command Reference
78-15304-01
Chapter 2 Cisco IOS Commands
show mls qos interface
This is an example of output from the show mls qos interface command when pass-through mode is
configured on an interface:
Switch> show mls qos interface fastethernet0/2
FastEthernet0/2
trust state:not trusted
trust mode:not trusted
COS override:dis
default COS:0
pass-through:dscp
Related Commands Command Description
mls qos cos Defines the default class of service (CoS) value of a port or assigns the default
CoS to all incoming packets on the port.
mls qos map Defines the class of service (CoS)-to-Differentiated Services Code Point
(DSCP) map and DSCP-to-CoS map.
mls qos trust Configures the port trust state. Ingress traffic can be trusted and classification
is performed by examining the CoS or DSCP value.