Specifications

2-176
Catalyst 2950 and Catalyst 2955 Switch Command Reference
78-15304-01
Chapter 2 Cisco IOS Commands
show interfaces
show interfaces
Use the show interfaces privileged EXEC command to display the administrative and operational status
of all interfaces or a specified interface.
show interfaces [interface-id | vlan vlan-id] [accounting | capabilities [module
{module-number]} | description | etherchannel | pruning | stats | status [err-disabled] |
switchport | trunk] [ | {begin | exclude | include} expression]
Syntax Description
Note Though visible in the command-line help strings, the crb, fair-queue, irb, mac-accounting,
precedence, random-detect, rate-limit, and shape options are not supported.
Command Modes Privileged EXEC
interface-id (Optional) Valid interfaces include physical ports (including type, slot, and port
number) and port channels. The valid port-channel range is 1 to 6.
vlan vlan-id (Optional) VLAN ID. The valid VLAN range is 1 to 4094 when the enhanced
software image (EI) is installed and 1 to 1005 when the standard software image
(SI) is installed. Do not enter leading zeros.
accounting (Optional) Display interface accounting information.
capabilities (Optional) Display the capabilities of the ports.
description (Optional) Display the administrative status and description set for an interface.
etherchannel (Optional) Display interface EtherChannel information.
pruning (Optional) Display interface trunk VTP pruning information.
stats (Optional) Display the input and output packets by switching path for the
interface.
status (Optional) Display the status of the interface.
err-disabled (Optional) Display interfaces in error-disabled state.
switchport (Optional) Display the administrative and operational status of a switching
(nonrouting) port.
trunk Display interface trunk information. If you do not specify an interface,
information for only active trunking ports appears.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
| module
module-number
(Optional) The module or interface number. If you do not specify a module
number, the information is displayed for all ports.
expression Expression in the output to use as a reference point.