Specifications

2-166
Catalyst 2950 and Catalyst 2955 Switch Command Reference
78-15304-01
Chapter 2 Cisco IOS Commands
show dot1x
Related Commands
Table 2-8 show dot1x statistics Field Descriptions
Field Description
RX EAPOL
1
Start
1. EAPOL = Extensible Authentication Protocol over LAN
Number of valid EAPOL-start frames that have been received
RX EAPOL Logoff Number of EAPOL-logoff frames that have been received
RX EAPOL Invalid Number of EAPOL frames that have been received and have an
unrecognized frame type
RX EAPOL Total Number of valid EAPOL frames of any type that have been received
RX EAP
2
Resp/ID
2. EAP = Extensible Authentication Protocol
Number of EAP-response/identity frames that have been received
RX EAP Resp/Oth Number of valid EAP-response frames (other than response/identity
frames) that have been received
RX EAP LenError Number of EAPOL frames that have been received in which the packet
body length field is invalid
Last EAPOLVer Protocol version number carried in the most recently received EAPOL
frame
LAST EAPOLSrc Source MAC address carried in the most recently received EAPOL frame
TX EAPOL Total Number of EAPOL frames of any type that have been sent
TX EAP Req/Id Number of EAP-request/identity frames that have been sent
TX EAP Req/Oth Number of EAP-request frames (other than request/identity frames) that
have been sent
Command Description
dot1x default Resets the global 802.1X parameters to their default values.