Specifications

2-152
Catalyst 2950 and Catalyst 2955 Switch Command Reference
78-15304-01
Chapter 2 Cisco IOS Commands
show auto qos
Examples This is an example of output from the show auto qos command when auto-QoS is enabled:
Switch# show auto qos
Initial configuration applied by AutoQoS:
wrr-queue bandwidth 20 1 80 0
no wrr-queue cos-map
wrr-queue cos 1 0 1 2 4
wrr-queue cos 3 3 6 7
wrr-queue cos 4 5
mls qos map cos-dscp 0 8 16 26 32 46 48 56
!
interface FastEthernet0/3
mls qos trust device cisco-phone
mls qos trust cos
This is an example of output from the show auto qos interface command when the auto qos voip
cisco-phone interface configuration command is entered:
Switch# show auto qos interface
Initial configuration applied by AutoQoS:
!
interface FastEthernet0/3
mls qos trust device cisco-phone
mls qos trust cos
This is an example of output from the show auto qos interface fastethernet0/3 command when the
auto qos voip cisco-phone interface configuration command is entered:
Switch# show auto qos interface fastethernet0/3
Initial configuration applied by AutoQoS:
!
interface FastEthernet0/3
mls qos trust device cisco-phone
mls qos trust cos
This is an example of output from the show auto qos command when auto-QoS is disabled:
Switch# show auto qos
AutoQoS is disabled
Related Commands Command Description
auto qos voip Automatically configures QoS for VoIP within a QoS domain.