Specifications

2-107
Catalyst 2950 and Catalyst 2955 Switch Command Reference
78-15304-01
Chapter 2 Cisco IOS Commands
mls qos cos
This example shows how to assign all the packets entering a port to the default port CoS value of 4:
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# mls qos cos 4
Switch(config-if)# mls qos cos override
You can verify your settings by entering the show mls qos interface privileged EXEC command.
Related Commands Command Description
mls qos map Defines the CoS-to-DSCP map or the DSCP-to-CoS map.
mls qos trust Configures the port trust state.
show mls qos interface Displays quality of service (QoS) information.