Specifications

4-20
Cisco IOS Telephony Service, Version 2.02
Chapter 4 Advanced Configuration Tasks
Integrating Voice Mail
Configuring Cisco Unity Ports
Note After Cisco Unity software is installed on the PC, you see two icons on the desktop: System
Administration and Status Monitor.
The port configuration on the Cisco Unity software must match the port configuration on the Cisco IOS
Telephony Service router. To configure the Cisco Unity ports, perform the following steps:
Step 1 Click the System Administration icon on the desktop. The screen shown in Figure 4-11 appears.
Figure 4-11 System Administration Window
Step 2 In the System menu, click Ports. The Port Configuration dialog box, shown in Figure 4-12, appears.
Step 3 To match the settings from Cisco Unity, click port number 1 and choose Answer Calls. Make sure that
Dial Out MWI is not chosen, as shown in Figure 4-12.
Step 4 Click port number 2 and repeat Step 3.
Step 5 Click port number 3 and repeat Step 3.