Specifications

4-19
Cisco IOS Telephony Service, Version 2.02
Chapter 4 Advanced Configuration Tasks
Integrating Voice Mail
Step 3 In the Av-Cisco Service Provider Settings dialog box, shown in Figure 4-10, perform the following steps.
Figure 4-10 Av-Cisco Service Provider Settings Dialog Box
a.
Confirm the IP address of the Cisco IOS Telephony Service router.
b. Confirm the number of Cisco Unity ports.
c. Confirm the Device name prefix. The default name is CiscoUM-VI. The voice-mail device name
must match the device name configured on the Cisco IOS Telephony Service router.
d. Enter the directory numbers next to MessageWaitingOnDN and MessageWaitingOffDN.
Note These directory numbers must match the extension numbers configured on the Cisco IOS
Telephony Service router.
e. Confirm that the CallManager Device List displays the correct number of Cisco Unity Ports.
f. Click OK.
Step 4 The Av-Cisco Service Provider dialog box, shown in Figure 4-9 reappears. Click Test.
If you do not receive an error message, click OK.
Step 5 Restart Cisco Unity.
Step 6 To modify any configuration, repeat Step 1 through Step 4.