Specifications

4-6
Cisco IOS Telephony Service, Version 2.02
Chapter 4 Advanced Configuration Tasks
Configuring a Graphical User Interface
Setting Up for the Cisco IP Phone End User
As the administrator, you also must set a username and password for each Cisco IP phone end user. After
you have assigned a username and password for the end user, the user can log in to the GUI to change
the password, search local telephone numbers, and change speed-dial settings for the user’s IP phone.
To provide GUI access to the Cisco IP phone end user, perform the following steps:
Step 1 Access the GUI interface for the Cisco IOS Telephony Service by going to the following URL:
http://ip_address/telephony_service.html
where ip_address is the router IP address of the Cisco IOS Telephony Service router.
Step 2 When you go to the telephony_service.html page, you see the window shown in Figure 4-3. To provide
the Cisco IP phone user personal login and initial password, enter the username and initial password of
the end user and click Submit to log in as the end user.
Note The window shown in Figure 4-3 is the common login window for you and the Cisco IP phone end user.