Specifications

4-2
Cisco IOS Telephony Service, Version 2.02
Chapter 4 Advanced Configuration Tasks
Configuring a Graphical User Interface
To configure the Cisco IOS Telephony Service router for GUI, perform the following tasks:
• Enabling an HTTP Server on Cisco IOS Software, page 4-2 (required)
• Setting Up the GUI, page 4-2 (required)
Enabling an HTTP Server on Cisco IOS Software
The HTTP server in Cisco IOS software is disabled; so to use GUI, you must enable the HTTP server.
SUMMARY STEPS
1. ip http server
2. ip http path flash
DETAILED STEPS
Setting Up the GUI
This process sets up a username and password for administrator-level login to the GUI and sets up the
username and password for the Cisco IP phone end users.
SUMMARY STEPS
1. telephony-service
2. admin-username username
3. admin-password password
4. dn-webedit
5. time-webedit
6. exit
7. ephone tag
8. username username password password
DETAILED STEPS
Command Purpose
Step 1
Router(config)# ip http server
Enables the Cisco web browser user interface on the
local Cisco IOS Telephony Service router.
Step 2
Router(config)# ip http path flash
Sets the base HTTP path for HTML files.
Command Purpose
Step 1
Router(config)# telephony-service
Enters telephony-service configuration mode.
Step 2
Router(config-telephony-service)# admin-username
username
Sets username for the local system administrator of
the Cisco IOS Telephony Service. The default
username is Admin.