Specifications

3-8
Cisco IOS Telephony Service, Version 2.02
Chapter 3 Additional Configuration Tasks
Information About Additional Configuration Tasks
The Cisco IP Phone 7960 and Cisco IP Phone 7940 can support four URLs in association with the four
programmable feature keys on the IP phones. The four feature keys on the IP phone are configured using
the keywords. The fifth key—Settings—is managed entirely by the phone. Operation of these services
is determined by the IP phone capabilities and the content of the referenced URL.
SUMMARY STEPS
1. telephony-service
2. url {directory | information | messages | services} url
DETAILED STEPS
Configuring Speed-Dial
This task configures speed-dial for numbers that are used frequently.
SUMMARY STEPS
1. ephone tag
2. speed-dial button-number directory-number
Command Purpose
Step 1
Router(config)# telephony-service
Enters telephony-service configuration mode.
Step 2
Router(config-telephony-service)# url {directory |
information | messages | services} url
Provisions URLs for use by the Cisco IP phones. The
four keywords directory, information, messages,
and services correspond with the four feature keys on
the IP phone: Directories, Information, Messages,
and Services. The purpose of the url command is
simply to provision the URLs through the
SEPDEFAULT.cnf configuration file supplied by the
Cisco IOS Telephony Service router to the Cisco IP
phones during phone registration. The maximum
character length for the URL is 128.
You can disable the local directory by entering url
directories none. You must reset the Cisco IP phones
before the url command can take effect.
Note By default, the router automatically uses the
local directory service. Provisioning the
directory URL to select an external directory
resource disables the Cisco IOS Telephony
Service local directory service.