Specifications

3-2
Cisco IOS Telephony Service, Version 2.02
Chapter 3 Additional Configuration Tasks
Information About Additional Configuration Tasks
• Translation rules
• Huntstop enable or disable
• Top-line description on Cisco IP phone display
• Two-way intercom between two IP phones
• Paging
• Interactive voice response (IVR) auto-attendant
Configuring Date and Time
This process configures the date and time format that appears on Cisco IP phones.
SUMMARY STEPS
1. telephony-service
2. date-format {mm-dd-yy | dd-mm-yy}
3. time-format {12 | 24}
DETAILED STEPS
Configuring Dial-Plan Pattern
This process configures a global prefix for the expansion of abbreviated extension numbers into fully
qualified E.164 numbers.
SUMMARY STEPS
1. telephony-service
2. dialplan-pattern tag prefix-pattern extension-length length [no-reg]
Command Purpose
Step 1
Router(config)# telephony-service
Enters telephony-service configuration mode.
Step 2
Router(config-telephony-service)# date-format
{mm-dd-yy | dd-mm-yy}
Sets the date display format on all Cisco IP phones
attached to the router.
The default is set to mm-dd-yy.
Step 3
Router(config-telephony-service)# time-format
{12 | 24}
Sets the time display format on all Cisco IP phones
attached to the router.
The default is set to 12 hours.