Specifications

5-157
Cisco IOS Telephony Service, Version 2.02
Chapter 5 Command Reference
url (telephony-service)
url (telephony-service)
To provision URLs for the Cisco IP phones connected to the Cisco IOS Telephony Service router, use
the url command in telephony-service configuration mode. To remove URLs, use the no form of this
command.
url {directory | information | messages | services} url
no url {directory | information | messages | services} url
Syntax Description
Defaults By default, the router automatically uses the local directory service.
Command Modes Telephony-service configuration
Command History
Usage Guidelines The url command provisions URLs for use by the connected Cisco IP phones. The Cisco IP Phone 7960
and Cisco IP Phone 7940 can support four URLs in association with the four programmable feature keys
on the IP phones. The four feature keys are Directories, Information, Messages, and Services. (The fifth
key—Settings—is managed entirely by the phone.) Operation of these services is determined by the
Cisco IP phone capabilities and the content of the referenced URL. The purpose of the url command is
simply to provision the URLs through the SEPDEFAULT.cnf configuration file supplied by the
Cisco IOS Telephony Service router to the Cisco IP phones during phone registration. You can disable
local directory by entering url directories none. You must reset the Cisco IP phones before the url
command can take effect.
directory The directory URL.
information The information URL
messages The messages URL.
services The services URL.
url A URL string.
Release Modification
12.2(2)XT This command was introduced on the following platforms: Cisco 1750,
Cisco 1751, Cisco 2600 series, and Cisco 3600 series multiservice routers,
and Cisco IAD2420 series IADs.
12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T and
implemented on the Cisco 3725 and Cisco 3745 routers.
12.2(8)T1 This command was implemented on the Cisco 2600-XM and Cisco 2691
routers.
12.2(11)T This command was integrated into Cisco IOS Release 12.2(11)T and
implemented on the Cisco 1760 routers.