Specifications

5-151
Cisco IOS Telephony Service, Version 2.02
Chapter 5 Command Reference
timeouts interdigit (telephony-service)
In this example, the 5 seconds refers to the time in seconds after which an incompletely dialed number
will timeout. For example, if you dial nine digits (408739898) instead of the required 10 digits
(4087398984) you hear a busy tone after 5 “timeout” seconds.
Related Commands Command Description
ephone-dn Enters ephone-dn configuration mode and configures the directory numbers
for the Cisco IP phone lines.
telephony-service Enables Cisco IOS Telephony Service and enters telephony-service
configuration mode.
timeouts interdigit Configures the interdigit timeout value for a specified voice port.