Specifications

5-148
Cisco IOS Telephony Service, Version 2.02
Chapter 5 Command Reference
telephony-service
ephone-dn Enters ephone-dn configuration mode and configures the directory numbers
for the Cisco IP phone lines.
ip source-address Identifies the IP address and port number that the Cisco IOS Telephony
Service router uses for the IP phone service.
keepalive Configures the time interval between sending keepalive messages to the
router used by the Cisco IP phones.
load Downloads the Cisco IP phone firmware used by the Cisco IP phone type.
max-dn Configures the maximum number of directory numbers supported by the
Cisco IOS Telephony Service router.
max-ephones Configures the maximum number of Cisco IP phones supported by the
Cisco IOS Telephony Service router.
reset Resets the Cisco IP phone.
timeouts interdigit Configures the interdigit timeout value for all Cisco IP phones attached to
the router.
transfer-pattern Allows transfer of telephone calls to other non-IP phone numbers.
url Provisions URLs for use by the Cisco IP phones connected to the Cisco IOS
Telephony Service router.
voicemail Configures the telephone number that is speed-dialed when the message
button on a Cisco IP phone is pressed.
Command Description