Specifications

5-143

Cisco IOS Telephony Service, Version 2.02

Chapter 5 Command Reference

show telephony-service voice-port

To display virtual voice-port configuration of the Cisco IOS Telephony Service router, use the show

telephony-service voice-port command in EXEC mode.

show telephony-service voice-port

Syntax Description This command has no arguments or keywords.

Command Modes EXEC

Command History

Usage Guidelines The show telephony-service voice-port command displays virtual voice- port configuration of the

Cisco IOS Telephony Service router. Each Cisco IP phone corresponds to a virtual voice port. For

example, Cisco IP phone directory number 7 corresponds to virtual voice port 50/0/7. The virtual voice

port provides the telephone line associated with the Cisco IP phone directory number (ephone-dn).

Examples The following is sample output from the show telephony-service voice-port command:

Router# show telephony-service voice-port

voice-port 50/0/1

station-id number 5001

voice-port 50/0/2

station-id number 5002

timeout ringing 8

voice-port 50/0/3

station-id number 5003

voice-port 50/0/4

station-id number 5004

Release Modification

12.1(5)YD This command was introduced on the following platforms:

Cisco 2600 series and Cisco 3600 series multiservice routers, and

Cisco IAD2420 series IADs.

12.2(2)XT This command was implemented on the Cisco 1750 and

Cisco 1751 multiservice routers.

12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T and

implemented on the Cisco 3725 and Cisco 3745 routers.

12.2(8)T1 This command was implemented on the Cisco 2600-XM and Cisco 2691

routers.

12.2(11)T This command was integrated into Cisco IOS Release 12.2(11)T and

implemented on the Cisco 1760 routers.